Signfix brackets and clips are universal and will fit any range of Signfix channel extrusions. Signfix Systems has available a range of fasteners normally supplied with brackets and clips but able to be purchased on there own. To optimise the fit and to resist any tendency to twist or "pull through" the channel under high torque the Signfix LIP-LOK bolt is supplied with brackets and clips. The LIP-LOK bolts have an ultimate tensile strength of 70N/mm2 and should be tightened up to a maximum torque load of 25Nm using a calibrated torque wrench. Failure to correctly torque up bolts on brackets and clips is the single most common cause of sign installation failure.

For more information including fastener lubrication and torque requirements, please refer to Bracket & Clips - Torque Settings for Bolts under Important Technical Information HERE

Product Codes (Photos to come):
M8-15SQ     M8-15MM S/S SQ HEAD NUTS/BOLTS
M8-25SQ     M8-25MM S/S SQ HEAD NUTS/BOLTS
M8-32TIB    M8-32MM S/S TWIST NUTS/BOLTS

M8-35 Nuts / Bolts
Product Code:
M8-35        M8-35MM S/S LIP LOK NUTS/BOLTS